Aircraft
For any listing, call Homer @ 937-477-6911****
Wanted:
- SOLAR T62-32 Gas Turbine Engines
Have you discovered an old helicopter kit in your garage and don’t know what to do with it? Let us know! We are always looking for:
- Scorpion Kits/Components
- Classic Rotorway Exec Kits/Components
For Sale:
ROTORWAY & HELICYCLE COVERS!
Call Homer…
INSTRUCTOR INFO:
Contact Nicholas Burton at 423–307–2253. R44/R22 and the Rotorway product.
$75.00 per hob hour for Rotorway and $100 a hob hour for the Robinson product. No charge for ground school instruction. Willing to travel at the customers expense. Minimum of three hours a day.
FOR SALE
2005 ES 101 Raven, built in Italy.
All maintenance records avaiable, Solar Turbine, 646 hours TT, Carbon blades in perfect condition.
Flown regularly. Registered as ultralight in italy. $115,000 USD
SOLD
Exec162F 2005, Spurling Cog Drive/Belt, 35mm Secondary, Talon Gear, Electric Clutch, Collective Friction Control, much Chrome, very well appointed. Fresh annual. Located in southern IL. 299 hrs TT
$60,000
FOR SALE
Coming soon. 2006 Exec 162F mostly in boxes….call Homer
Very little work complete. $25,000
FOR SALE:
Timed out R22 in years, Runs great. Well taken care off. Total details available if interested. $40,000 Or Reasonable Offer, in Southern California.
FOR SALE:
162F, Clean, New E-bearnings in 2022.. $65,000, in Vermont
FOR SALE:
HELICYCLE: Purchased in 2014, Build completed 2016. It has a certificate of airworthiness, MGL 10" glass panel, MGL 10-watt radio, transponder with ADSB-out. Extra set of elastomeric bearings, 41hours.
Several upgrades from Eagle: Hood strut support, Rotor head bush to bearing conversion kit (new in package), Dual engine speed sensor, Cyclic mixer, Filter strip for governor connection, Factory assembled MR blades and complere tail rotor assembly, Custom pedals, Half doors, Oil cooler for gearbox, Eagle R&D Helicycle custom seat.
USD$44,000, Located in Australia….REDUCED
SOLD
Nearly complete, nicely built Helicycle Group 6 kit. Builder has passed away. Priced at $39k or REASONABLE offer. Located in St Cloud , Minnesota REDUCED
SOLD
:2003 162F just in, 59 hours total time. Cog drive with 35mm secondary, nice doors with aircraft type heater for cold country operation. Reversed gear with long skids and shoes. Nav lights and strobe. Bendix/King radios and Transponder. May decide to run it awhile, of course could sell it ,too. $55,000 or a reasonable offer, and you can fly it. I have others I can build up.
SOLD:
Older Exec Kit that was flying, now taken apart to be updated. Engine has updated ignition, has elastomeric rotor system ready to be installed. Other updates available for an additional cost.
Choices of main blades as follows: new carbon fiber composites or used RW asymmetrical
Price varies by options chosen, starting at $15,000.
SOLD:
2000 Rotorway Exec 162f for sale.$60,000 Serial number. 6422N number. N249RC Total Time Engine and Airframe…. 172.2 hrsNo damage history. Build finished and Registered in 2002.Main and T/R blades tracked and balanced. Fly’s smooth as glass at 100 mph.
Mods and Equipment: 1) Spurling - 40mm secondary - Cog Belt Drive System - Electric Clutch - Rotorhead bushings, pins, and etc. 2) Vertical Card Compass 3) Homer Bell Throttle Friction 4) New Starter (2.0kw HiTorque Performance Starter by Chris Isom modified for the 162f at www.hightorque.com.The original 162f starter was 1.2kw….It works fantastic , much better than original) 5) King KT76A xpdr (TSO) 6) Valcom 760 com radio. (TSO) 7) Doors with vent windows 8) Nav lights and beacon 9) Aft fuselage side panels attached by overlapping mod that eliminates a lot of screws and is secured by several dzusfasteners for quick removal and installation .10) Storage compartment under R/floorboar
SOLD
R22 with 350 hrsleft before rebuild needed. Turn key ready to go. Machine is in East Tennessee.
REDUCED TO $98,000 USD
FOR SALE:
Convert your R22 to an Ultralight CL02 using a Rolls Royce Gaz turbine kit for 40,000 Euros
Conversion explained here: https://cl02ulm.wixsite.com/cl02
Or with English subtitles: https://youtu.be/dXgc4lKHHu8
.
Components
Wanted:
- SOLAR T62-32 Gas Turbine Engines
Have you discovered an old helicopter kit in your garage and don’t know what to do with it? Let us know! We are always looking for:
- Scorpion Kits/Components
- Classic Rotorway Exec Kits/Components
For Sale:
Rotorway Exec/Talon & Eagle Helicycle Covers Available. Call Homer.
FOR SALE:
Brand new Fully Composite Main Rotorblades (for Rotorway) - stainless steel leading edge, NOT an aluminum spar, carbon fiber in 3 different areas, has 5 degree twist, blade has been tested by Homer (last few years) $9,000
Complete 1 3/4” Main Rotor System - Rotorhead, swash plate, main shaft, etc $12,000
5/16” Rod End bearings (left and right hand) $21/ea
Elastomeric Bearings available by order (Call for Price)
Brand new set of Rotorway Main Rotorblades - straps installed, no paint $12,000
Blade reflex angle gauge…$400
Throttle Friction Grips for Rotorways…Call Homer for Pricing.